Gear Coasters

This download includes a set of gear-shaped table coasters. These can been cut from most thicknesses. Always keep the minimum hole size in mind and adjust as needed. Minimum hole size should be 1.5x material thickness.

Before you send your file to us, be sure to go through the pre-flight checklist:

My file is 2D
My file is built at a 1:1 scale
All my type is outlined
I have no open contours
Reversed type has bridges
I have cleaned up all stray points, empty objects and text areas
All my objects are on the same layer
All holes and cutouts are at least 1.5x material thickness
No feature or detail is smaller than 0.010"